Latest News

Category: Home Improvement

Jan 17 2012

Colonial-Style Homes Still Hold Their Architectural Ground

One of the most enduring home styles in America is the Colonial. Although the first true Colonial homes were built as early as the late 1600s, revivals of the style have persisted well into the 21st century. Characterized by steep roofs, traditional room layouts and numerous smaller windows, Colonial-style homes have a place all across the country.

Colonial Home History

When the first immigrants settled on U.S. soil, they brought with them the aesthetics, culture and customs of their former countries — including their idea of home design. Colonial-style homes are the “New World” adaptation of modest English homes.

Is My Home a Colonial-Style House?

Chances are if your home is located in New England and built anywhere between the 18th and 19th century, your home is a Colonial. However, homes built well after this time period retain much of the Colonial aesthetic. Here are a few defining features:

  • high-peaked roofs
  • little to no roof overhang
  • massive central or end chimneys
  • symmetrically shaped structure
  • several small windows
  • later style Colonial homes include pillars, dormer windows and brick detailing

Colonial style homes is one of the four custom home styles found throughout Ford's Colony.  Custom home designs must be of the Colonial, Federal, Georgian, or Greek Revival

0 comments - Posted at 9:00 AM

Categories: Home Improvement

Jan 12 2012

Top 5 Requests for Home Design

1) Remodel

You saw that one coming didn’t you?  Or haven’t you read a newspaper in 3 years? Homeowners are staying put. They’ve got too much invested in their homes and neighborhoods to let them go at the current market prices.  Or they’re buying existing homes in great neighborhoods and making them their own.

2) Keep it under 3,000 square feet

Not sure how this became the magic number, but a high percentage of new home clients have made this specific request.  It’s still a much higher number than the average American home (about 2,100 square feet in 2009), but significantly lower than the custom homes of just a few years ago.

Interestingly, while homeowners are spending less on house size, they’re spending more in other areas.  This is a great sign – we’re moving past an emphasis on the “bigness” of a house as a measure of its quality.

3) Lots of light and windows

Simply put, there’s more to see than just the houses next door – so it’s no surprise they’d want more glass area to enjoy the view.

A close second reason may be the architectural character and styles – less of the “formal” styles that have generally have fewer windows and more of the “casual” styles that work well with more glass.

4) Zero wasted space

More and more I’m hearing that folks want to get the most from every square foot.

And not just because less house costs less to build and maintain, but because homeowners are coming to realize that wasted space in their house is usually offset by a loss of quality and detail somewhere else.

Specifically, homeowners are cutting back on “single-use” rooms (dens, private baths), “showy” spaces (two-story foyers, galleries, long hallways), and on overly-formal spaces (dining rooms, living rooms).

5) Energy efficiency

Another no-brainer, with a catch.  Energy efficiency isn’t just about insulation, high-tech glass, and geothermal heat pumps anymore; it’s about designing and orienting a home to respond to the particulars of the site.

These days most homebuyers expect tight construction, an efficient heating system, and plenty of insulation, as much of that’s become the industry standard.  But when you start with energy-efficient design strategies, you can save a lot more.

From Zillow.com.  By Richard Taylor

0 comments - Posted at 9:00 AM

Categories: Home Improvement | Real Estate News

Jan 7 2012

How To Get an Architectural Review Board to Approve Your Home Design or Remodeling Project

Author: Richard Taylor

If you’re planning on building a custom home in a new development or remodeling a home in an older neighborhood, you’ll likely find your plans subject to design review.

Design review boards go by different names: ARB (Architectural Review Board), DRC (Design Review Committee), ARC (Architectural Review Committee) and others.

They’ve been called less flattering names by homeowners whose proposals don’t get favorable treatment.


But, design review serves an important function in maintaining character, consistency, and property values in neighborhoods where it’s used. It should be seen as something that works in every homeowner’s favor.

Why Architectural Review Boards Exist

When you live in an architecturally restricted area, you’re not the only “owner” of your house. The look of your house, and the role it occupies in the fabric of your neighborhood, are “owned,” in part, by the community.

That’s a hard concept to swallow for some homeowners. But if you keep in mind that it’s probably the character of the neighborhood that attracted you to the home in the first place, you’ll begin to understand why the whole community has a stake in the appearance of your home.

You have to share that character and protect it for your neighbors, as they protect theirs for you. Organized design review exists to help protect your investment, and to help you to develop your property in a way that protects the investments of your neighbors.

What ARBs Do

Review boards come in two varieties, public and private, and they vary in what aspects of design and building they control. Some are informal and relaxed in what they review. Others are very restrictive. In historic neighborhoods, for example, design review may be organized around guidelines published by the National Park Service that detail how to preserve and restore properties with historic significance.

In older but less historic areas, preserving history isn’t a much a concern as maintaining the unique character of the area. Often these areas are near the center of cities and have been through several cycles of redevelopment, each time losing valuable buildings forever.

“Losing” a building doesn’t necessary mean demolishing it; poorly conceived additions and remodeling projects can also obscure important parts of the neighborhood’s architectural fabric.

In new residential developments, the developers may start with a concept for the homes that includes a certain level of architectural design and detail, a palette of exterior materials, even a restriction on the architectural style of the homes in the development.

Different Types of ARBs

Public boards are almost always made up of appointed citizens who preside over scheduled public meetings. These are usually municipal boards that oversee older, established neighborhoods. Proposed projects are submitted for inclusion on an agenda and the public is invited to comment. The meetings are forums for give and take between the board and the homeowner to allow a process for projects to be reworked before a final vote is taken.

Newer developments engage in private design review. It is often done by a subcontracted architectural firm and is almost never in public view. Drawings are submitted when they’re ready and returned with or without comment at a later date. This type of review can be more difficult to navigate and shouldn’t be done without a clear idea of what is likely to be approved.

What to Expect from a Design Review

As a veteran of countless design review meetings for my own projects, I’ve picked up a lot insight about how to present a project for review, and, maybe more significant, how not to present a project. Also, having been a member of several review boards, I’ve seen the good, the bad, and the ugly from the other side of the table many times. Here’s some of what I’ve learned.

Read and understand the design guidelines: Board members love projects that are easy to approve. If the project you want to build doesn’t address the guidelines or the character of the community it’ll be difficult to get it through. Remember that it’s the community that wants the guidelines enforced.


Ask for a concept review first: Many projects benefit from a preliminary concept review. It’s an informal and non-binding once-over by the review board, and can highlight issues of concern. This is the time to find out what the board likes and what they object to, and to negotiate solutions before the project is committed to final drawings. It isn’t unusual in concept review for new solutions to arise, and they’re often more efficient than the original idea.

Be flexible: There are almost always other possible solutions, and the board may want to explore them with you. You might find that a small change to your design gets you the votes you need.

Be patient: You’ve been working on this project for a long time, but it’s the first time the board has seen it. Give them time to study, ask questions, and consider the impact on the community. And since your project probably isn’t the only one on the agenda, bring along a cup of coffee and a magazine. You may be there a while!

Present complete documents: Public review boards, in particular, require voluminous applications. Prepare detailed drawings that don’t leave unanswered questions. Bring material samples and paint colors. The clearer your submittable, the fewer things the board will find to question.

Prepare to negotiate: Go into the meeting knowing what you’re willing to give up, and what you must keep. Design review boards will often happily trade something you want in return for the elimination of an undesirable feature.

And finally, keep in mind that the ARB that reviews your project is the same one that keeps your next-door neighbor from painting his house purple.

To learn more about the Architectural Review process in Ford's Colony, visit www.fordscolony.com

1 comments - Posted at 9:00 AM

Categories: Home Improvement

Dec 23 2011

5 Tips for Being a Fabulous Holiday Host by Erika Riggs

You are a fabulous host and your home is the prime gathering spot for family and friends during the holidays. While you might welcome this role and responsibility, you might also stress out about how to deal with the guests who will soon arrive. Because, after all, even the most cheerful host can turn grinch-like.

1. Turn ‘em loose in town

Provide your guests with a list of local area attractions, maps, and ideas to get your guests out of the house for a few hours. This clears the space for you to clean and prepare meals and it also gives everyone a change a scenery each day as well as creating memories.

2. Food at the ready

Just because you’re the host doesn’t mean you are tied to the kitchen 24 hours a day and on duty as a  short-order cook. Instead, pick up items for sandwiches, or other easily assembled snacks and ask guests to fix their own meals when they are hungry. Have plenty of snacks and fruit around so they can just pick it up and go!

3. Make them feel at home

Even if your home is small, carve out a space for them to relax. Set up a basket with books, magazines and other activities. Put out extra towels, soap and other little toiletries your guests may need.

4. Put them to work

Chances are, your guests will insist on helping — either in the kitchen or elsewhere, so take them up on the offer! Give them tasks such as dicing vegetables, washing dishes, or running to the store for provisions.

5. Games, movies, and cards

Having a puzzle, board games or cards out with plenty of snacks are great evening activities. Show them how to connect to the Internet, or watch a movie.

From Zillow.com

 





0 comments - Posted at 9:00 AM

Categories: Home Improvement

Dec 13 2011

How is Square Footage Measured? You’ll Be Surprised by Brendon DeSimone

An inch is an inch is an inch. Or, so you’d think. But when it comes to measuring the square footage of a property, it’s not quite that simple.


I doubt there exists a buyer in the entire world of real estate who hasn’t asked, at one time or another, what is the square footage of a particular property. The fact is, however, measuring the size of a home isn’t an exact science.

You can hire three different appraisers to measure the same house and they may come up with three different measurements. Because there are multiple ways to measure and different mechanisms used, the physical act of measuring can be done differently. Some appraisers will measure square footage with a good old measuring tape, albeit a large one. Others come equipped with those new state-of-the-art laser devices. I have been present when an appraiser will just eyeball a difficult-to-measure space or even do the wide-arm measurement. The point is, there aren’t any universally applied standards.

What does this mean for sellers and buyers?

Sellers: Avoid providing square footage whenever possible and always add a disclosure

I once represented a client with a $2.5 million home for sale in San Francisco. Against my wishes, the sellers insisted I list the square footage in all of the marketing materials as 3,450 square feet. They showed me a copy of the floor plan and recent drawings from an appraiser. I reluctantly agreed to add the square footage and supplied the appraiser’s drawing and measurements with the property disclosure statements. I added my own disclosure, stating that square footage is not an exact science, that the number should not be relied upon as fact, and that multiple appraisers may measure multiple ways.

We received an offer. The buyer had all of their property inspections, reviewed city reports, and signed off on all the disclosures. Their agent came back when it was time to release the loan and appraiser contingency. The appraisal came in 30 square feet less than the seller’s appraisal.

Because of the discrepancy, the buyers wanted a $25K credit off the purchase price. The home had not gotten any smaller since the buyers first wrote their offer. Yet the buyers felt that the home was misrepresented; that they wrote an offer thinking it was something it was not. The seller ended up having to knock off $25K just to get the deal done. I believe that the buyers still would have written the offer, and for the same price, had we not listed square footage.

Dozens of lawsuits make it to court, and tens of thousands of dollars are spent arguing over as little as 50 square feet. That’s why my advice to sellers is to avoid listing square footage when possible. I know you want everyone to know how big your house or condo is, and you want every last piece of space to be included. However, as in the case of the seller who had to forfeit $25K, doing so can come back to haunt you. Buyers are coming to your home because of its location, price, number of bedrooms, bathrooms, parking, and the pictures and description they read online. If you leave out square footage, they are still going to come.

If you must market your property’s square footage, include a reference for your information, such as an appraiser’s estimation. For example, position it along the lines of “per tax records (or per a recent appraisal), the square footage is approximately xxx.” Also, don’t include illegal spaces, storage space, or the garage in your measurements.

Often times, without mention of square feet in any of the marketing remarks, buyers will turn to city tax records for that information.  These numbers often neglect previous renovations, expansions or improvements.  In the case of new construction, in some markets, these records are pulled from architectural drawings done by the developer, and submitted to the city before the property is built. This is often considered a “walls out” measurement, meaning the footage includes all of the space to the exterior wall.

As a result, a buyer they may think their potential new condo is 1,600 sq. ft. because the “city says so.” But when the appraiser comes inside the condo to measure, he’s usually using a “walls in” measurement — which often yields a square footage lower than what the architectural drawings state. Depending on the size of the home, the space between those walls can add up.

Buyers: Never take square footage at face value

Buyers want to know the square footage of a home they are interested in. They want some idea of the size of the house they’re serious about. They want to know exactly how much house they’re getting for the money.  But these numbers should be used only as a reference point.  A buyer should never make their home buying decision based on square the square foot of a home.

There are some situations, such as buying in a larger condo building (especially newer construction with identical finishes), when buyers are particularly interested in the price per square foot. They want to know this in relation to comparable sales. In these and other scenarios, my advice is to take square footage information with a grain of salt and don’t get too hung up on it.

A successful Realtor I worked with in San Francisco used to respond to buyers’ “what is the square footage” question with, “I haven’t measured it. Does the size of the house seem to work for you?” Her point was that a buyer either feels like the space is right or not, and that feeling is more important than a figure that may or may not be real.

Brendon DeSimone is a Realtor® and real estate expert based in San Francisco and New York. He is a contributor to Zillow Blog, has collaborated on multiple real estate books and is often quoted by major media outlets. Follow Brendon on Twitter.

Note: The views and opinions expressed in this article are those of the author and do not necessarily reflect the opinion or position of Zillow.  From Zillow.com

0 comments - Posted at 9:00 AM

Categories: Home Improvement | Real Estate News

Nov 29 2011

Living Room Updates for Under $500

Creating a new look in your living room doesn’t have to be expensive or time-consuming. If you’re selling your home, or just itching for an update, there is plenty to you can do for $500 or less.

Reuse and recycle. Before you head out to buy something new for your living room, see what is in your home that can work in the space. Rearrange furniture and art, and re-purpose items.

  1. $50 and up: Slipcover your furniture.  Rather than recover the chintz couch, pick up an affordable slip cover in a neutral color. A slip cover will cost a fraction of a new couch and many of them are designed to fit snugly over a variety of furniture styles.
  2. $50 to $150: Paint. If you do it yourself, a new coat of paint in a room is an affordable transformation. Even painting an accent wall or trim can drastically update the space. You can also repaint furniture, shelves or picture frames for a similar update or pop of color.
  3. $20 – $150:Lighting. Whether you pick up a floor lamp or pair of table lamps, lighting can say a lot about a room’s aesthetic. Check out brass or bronze lamps for a classic look, or aluminum for a modern feel.
  4. $50 and up:Drapes: Keep the room warmer by insulating the windows and add a finishing touch to the room with curtains in a variety of fabrics and styles. Make a small or short room expand by hanging a curtain rod with long drapes above the window.
  5. $15 to 75: Accessories: New throw pillows and blankets, a fun new piece of art or potted plant can also make a living room seem a little more put together. With the growing popularity of DIY magazines and television, it’s easier than ever to find affordable decor.

Want some more decorating tips for your home’s living room? Check out Zillow’s Dueling Digs for inspiration.

Date:November 3, 2011 Author:Erika Riggs

From Zillow, Inc. 

0 comments - Posted at 9:00 AM

Categories: Home Improvement

Nov 22 2011

Cooking Up Some Stove History

Just in time for Thanksgiving...

 

 

At the turn of the 20th century, cooking was no easy task. Without electricity or running water in many homes, cooking a meal involved hovering over a wood or coal-powered stove. It was hot, hard and a sketchy proposition, since the heat levels and consistency were often unreliable.

 


Although the first electric range was invented in 1910, the appliance remained unreliable even through the 1940s. Even into the 1970s, convection ovens were not ubiquitous in American kitchens but instead an option for only the most serious home chefs.

 


Today, for anyone who wants to do anything from boil water to prepare a 10-course meal worthy of a James Beard nomination, the home cook has far more choices. A cook can update his or her kitchen with restaurant-grade appliances that combine the power of gas and the accuracy of electricity. High-end homes for sale boast stainless steel appliances, two ovens and a range hood to whisk away any odors or fumes.

The future of ovens and stoves

While we’ve come a long way in the past 100 years in stove technology, the newest trends make simmering and searing easy for even the most amateur of cooks. While most stoves in new homes are stainless steel, have gas and convection options as well as at least one high-temp burner, there are quite a few new options for chefs coming down the pipeline.

Cooking Flexibility:

Forget the four-burner cooktops of old. Many new high-end stoves have six burners in various sizes and cooking strengths. Models include a low-heat burner for simmering and another for searing at high-heat. Some burners may be developed for the stir-fry devotee with a burner designed for a wok. Pancake lovers can get burners that connect using a “bridge” element to heat a large griddle or pan. Are you a crockpot user? Some stoves are now offering a slow-cooker element so you can whittle down one more appliance from your countertop.

Keep it Cool:

One of the biggest advancements in technology and manufacturing of home appliances has been the addition of a cooling element to ovens. Busy cooks can pop a roast in the oven in the morning and have it stay cold until the pre-programmed cooking time. Once the dish is done cooking and has been warmed for an hour, it reverts back to refrigeration to keep the item fresh.

Trivection Ovens:

Some high-end stoves have dual gas and electric cooking options, but the newest trend is trivection cooking which combines thermal, convection and microwave energy that dramatically shortens cooking time.  In some cases, baking can be finished five times faster than in a regular oven. While you may be able to bake a casserole faster, it doesn’t come cheap; a basic trivection oven starts at $2,000.

Back to the Flame:

Despite the progression of microwaves and convection cooking, there’s something to be said about a wood-fired pizza or smoked salmon. These yearnings help explain a movement toward cooking over an open flame. Masonry stoves are a heat storage fireplace that burns firewood and retains the heat for cooking. Developed hundreds of years ago and still popular in Europe, there are several online resources for homeowners to purchase and build their own masonry stove.


For the chefs out there, Zillow dug up a few homes with (amazing) stove eye-candy.  Click here to view them! 

Author:Erika Riggs

0 comments - Posted at 10:29 AM

Categories: Home Improvement

< Previous Entries